News
HomeNews
Exhibition
News
06-23
2026
What Is An Idler
Idler gear refers to the gear that plays a transmission role between two transmission gears that are not in contact with each other, and meshes with these two gears at the same time,
06-23
2026
Adjust The Strength Of The Timing Belt Tensioner
A bolt, the tensioner has a position stuck on the oil pump, and then there is no need to tighten the screw first, the marks are aligned, and the timing belt is installed counterclockwise from the crankshaft wheel.
06-23
2026
Why Should The Hydraulic Tensioner Be Exhausted?
When it comes to hydraulic tensioners, they are basically old models. Such as; Audi Volkswagen 1.8T, Mitsubishi engine 4G64/64, etc. However, the old models also have new problems.
06-23
2026
Tensioner Structure Principle
In order to maintain proper belt tension, avoid belt slippage, compensate belt wear and elongation caused by aging
06-23
2026
Why Does The Tensioner Have Abnormal Noise?
The tensioner also has a lifespan, and there are three reasons for the noise of the tensioner on the old car
06-23
2026
The Role And Structure Principle Of The Tensioner
The function of the tensioner is to adjust the tightness of the belt, reduce the vibration of the belt during operation and prevent the belt from slipping to a certain extent
06-23
2026
The Precursor Of A Broken Tensioner
The tensioner is a belt tensioner used in the automobile transmission system.The tensioner is mainly composed of a fixed shell
06-23
2026
Tensioner Auto
The tension pulley is mainly composed of a fixed shell, a tension arm, a wheel body, a torsion spring, a rolling bearing and a spring sleeve
06-23
2026
Replace The Timing Belt And Tensioner
Disconnect the wire plug of the alternator, then remove the engine harness from the cylinder head, and remove the cylinder head cover.
06-23
2026
What Is The Seat Belt Pretensioner
The front passengers of this car have seat belt pretensioners. Although the seat belt pretensioners cannot be seen, they are an integral part of the seat belt assembly.
06-23
2026
How To Replace The Timing Belt And Tensioner
(3) Loosen the adjustment nut 2/3 by 1 turn.
(4) Rotate the crankshaft counterclockwise to make the timing belt on the camshaft pulley rotate 3 teeth.
06-23
2026
Replace Timing Belt And Tensioner
(1) Disconnect the negative cable of the battery first, and then disconnect the positive cable of the battery.
