Modified Load Condition For Limit Speed Of Automobile Tensioner

The modified load condition C / P <13 (that is, the equivalent dynamic load P exceeds about 8% of the basic rated dynamic load C) of the limit speed of the tightening wheel of the automobile, or the axial load in the combined load exceeds 25% of the radial load At this time, the limit speed should be corrected by the following formula. Here the corrected limit speed of the automobile bearing, the correction factor f2 related to the load condition: the correction factor n related to the combined load: the limit speed under general load conditions, the basic rated dynamic load, the equivalent dynamic load, the radial load, the axial load Load, the limit speed of the ball bearing with seal ring The limit speed of the ball bearing with contact seal ring is limited by the linear speed of the contact surface of the seal ring, allowing the linear speed of the automotive bearing to depend on the rubber material of the seal ring.

What effect does the tensioner and clutch release bearing have on the car

Tensioner is a wearing part of automobile and other spare parts. Tensioner is a belt tensioning device used in automobile transmission system. It is used to adjust the tightness of timing belt. It is generally changed together with timing belt. It is easy to be stretched after a long time. Some tensioners can automatically adjust the tension of the belt. In addition, with the tensioner, the belt runs more smoothly, the noise is lower, and it can prevent slipping.