How To Replace The Timing Belt And Tensioner

(3) Loosen the adjustment nut 2/3 by 1 turn.

(4) Rotate the crankshaft counterclockwise to make the timing belt on the camshaft pulley rotate 3 teeth.

(5) Tighten the wheel adjusting nut.

(6) After inspection, re-tighten the bolts of the crankshaft pulley with a tightening torque of 245N·m.

3. Precautions for adjusting the tension of the timing belt and balance shaft belt

It can only be adjusted when the engine is cold. Only the crankshaft can rotate counterclockwise (observed from the end of the crankshaft pulley); check whether there is oil or coolant adhesion on the belt; loosen the adjusting nut not more than one full turn; the tensioning device is made of spring. After loading and adjustment, the tensioning device will automatically make the belt tensioning force meet the specified requirements