How To Replace The Belt Tensioner
The tensioner is used for the belt tensioning device of the automobile transmission system. It is mainly used to adjust the tension of the timing belt. It is generally replaced with the timing belt to avoid other failures. Then the engine belt and the tensioner should be How to replace it? Let the editor introduce it to you.
First remove the cooling nut from the shock absorber seat, and then remove the cooling pot from the cooling pot holder and set it aside.
Insert the middle ratchet into the square hole of the tensioner and turn the tensioner counterclockwise to remove the belt. Then, before installing a new belt, you need to check whether each pulley is normal, mainly whether the rubber connection between the inner ring of the crankshaft pulley and the middle has been disconnected. If it is disconnected, please replace the crankshaft pulley.
Make sure that the belt fully enters the groove of the pulley and the belt transmission route is correct. Insert the middle ratchet into the square hole near the counterclockwise to turn the tensioner counterclockwise, install the transmission belt, and then install the antifreeze recovery pot. Tighten the nut of the antifreeze recovery pot to 3.3mm. During installation, pay attention to the lower part of the recovery pot to be inserted into the holder. The end of the hose from the recovery pot to the water tank must be flush with the neck of the water tank filling port. Do not rub the generator belt.
What effect does the tensioner and clutch release bearing have on the car
Tensioner is a wearing part of automobile and other spare parts. Tensioner is a belt tensioning device used in automobile transmission system. It is used to adjust the tightness of timing belt. It is generally changed together with timing belt. It is easy to be stretched after a long time. Some tensioners can automatically adjust the tension of the belt. In addition, with the tensioner, the belt runs more smoothly, the noise is lower, and it can prevent slipping.
