How To Adjust The Small Chain Tensioner

How to adjust the small chain tensioner

1. Loosen the nut on the tensioner.

2. Loosen the screws inside.

3. Start the engine and run for a while.

4. Then turn off the flame and tighten the screws.

5. Tighten the outer nut.

The main feature is to remove the guide wheel between the original timing wheel and the driving wheel and the tensioning wheel above the original driving wheel. On the central axis of the original tensioning wheel, there is a tensioning strip with an R arc sleeve, The tight bar is in conflict with the small chain, the adjusting wire is connected to the distal end, and the adjusting wire is fixedly connected with the cylinder body. Compared with the existing small chain tensioning device, it has the advantages of adjusting the tension of the small chain at any time and greatly prolonging the service life of the small chain.